Electrolux EKG801100 User Manual page 6

6 electrolux
Oven Safety device
The cooker features a thermocouple; if for
any reason the flame should extinguish, the
device will stop the gas flow.
Ignition
Attention: when turning on the oven
burner the oven door has to be
opened.
•
Open the oven door.
•
Lift the small lid on the bottom of the
cavity
•
Push the electronic ignition knob for
obtaining sparkles. Keep it pushed till
turning up of the flame (1 spark / second).
•
In the same time, push and turn the
control knob to the left to position 8,
keeping the control knob pressed until
the gas ignites (the sparker generator
produce a spark that lights the burner).
•
Upon ignition, keep the knob pressed for
approximately 10 seconds (until the safety
valve automatically keeps the burner lit)
If for any reason the flame should
extinguish turn control knob to the off
position, after at least 1 minute, try to re-
ignite the oven.
•
Close the oven door
•
Pre-heat the oven for 10 min. on
maximum setting, than turn the knob to
the desired position.
Or during a power cut
•
Open the oven door,
•
Lift the small lid on the bottom of the
cavity
•
Push and turn the control knob to the
left to position 8, and hold a flame near
the hole in the bottom;
•
Release the knob after 10 seconds
(until the safety valve automatically
keeps the burner lit) and check that
the burner is ignited through the
holes in the burner cover.
If for any reason the flame should
extinguish turn control knob to the off
position, after at least 1 minute, try to re-
ignite the oven.
•
Close the oven door
•
Pre-heat the oven for 10 min. on
maximum setting, than turn the knob
to the desired position.
Do not place cookware or foil
directly on the oven base.
Extinguishing of oven burner
Turn the knob clockwise to mark « ». The
safety device is in place.