Parallel Setting; Timeout - Oce VarioLink 2221 User Manual

Various settings

Parallel Setting

You can specify the mode for using an optional parallel interface. (Default
setting: ECP)
% After changing the setting, touch
[Enter].
– Compatible: Corresponds to
both Nibble and ECP.
– Nibble: Only for Nibble.
– ECP: Only for ECP.

Timeout

You can set the time until a communication timeout occurs. (Default setting:
300 sec)
% After using the keypad to type in a
value, touch [Enter].
Note
The time specified here for a timeout enables the parallel, USB, or
network interface.
A value outside the allowable range cannot be specified. Type in a value
within the allowable range.
To cancel changes to the settings, touch [Cancel].
VarioLink 2221/2821/3621
11
11-19