Specifying The User Authentication Settings - Oce VarioLink 2221 User Manual

Setting up the VXL/VPS driver (Windows Vista/Server 2008)
Proof Print
When a print job is sent, this machine stops printing temporarily after part of
the document has been printed. The remaining print job is stored in this
machine as a print job. When printing multiple copies, you can print the
remaining part of the print job after checking the print results.
Note
To print the document, release the held document from the Job mode in
this machine's control panel. For details, refer to "Print job management"
on page 11-82.
Proof and Print can be specified when "Collate" is specified.

Specifying the user authentication settings

If the user authentication settings have been specified on this machine, you
must enter a user name and password.
Note
If a job is printed using a user name or password that is not a registered
account on this machine, or if a job is printed without selecting a user
under "User Authentication", the operation is not authenticated by this
machine and the job is canceled.
When user authentication is specified on this machine and the Enhance
Security mode is enabled or when Access Lock is enabled on the
software DIP switch, the corresponding user may be locked out and
denied access if the authentication information is not entered correctly.
For details on user authentication and Enhance Security mode, refer to
User manual [Copy Operations].
If the user authentication settings are not specified on the Configure tab,
user authentication cannot be performed. If using the user authentication
function, be sure to specify the settings on the Configure tab. For details,
refer to "Specifying the Configure tab settings" on page 8-39.
VarioLink 2221/2821/3621
8
8-15