Calibrate The Océ Prismasync Controller - Oce CS550 Pro User Manual

4.3 Calibrate the Océ PRISMAsync controller
Introduction
The external controller is either an EFI (IC303/IC305/IC408), a Creo (IC304/IC304Plus)
or an Océ PRISMAsync controller. This procedure describes the calibration of the Océ
PRISMAsync controller. At the beginning of the procedure you print a calibration chart
that is used to calibrate the Océ PRISMAsync controller.
Print a calibration chart
From the 'System' view, press 'Calibrate'.
1.
[53] 'System' view
The list of media families appears.
Select the 'Media family' you want to calibrate and press 'OK'.
2.
4.3 Calibrate the Océ PRISMAsync controller
Chapter 4 - Printer calibration 47