Basic system configuration
Basic system configuration
The basic system configuration contains the following parts.
Printer
Controller
Scanner.
The basic system configuration has one of the following controllers
®
Fiery
photo spectrometer
Creo controller, IC304/IC304 Plus, default including a photo spectrometer
®
Fiery
eter is optional.
Océ PRISMAsync controller (Océ CS655 and Océ CS665 only) for which a photo
spectrometer is optional.
You can only calibrate a controller if you have a photo spectrometer.
Note:
Do not use the ColorCal / Off-the-glass method as described in the controller documen-
tation.
6
Chapter 1 - Introduction
PRO80/S450 65C-KM Color Server (IC303/IC305), default including a
X3e TY2 65C-KM (embedded controller (IC408) for which a photo spectrom-