Table of Contents
Advertisement
Select the media you want to use for calibration.
4.
[3] Media selection list
Click 'Print...' to set the print options and print the sorted patches chart.
5.
[4] Print options button
Select the following settings.
6.
At 'Page Type', select '34 Sorted patches' for A3/Tabloid (recommended).
Select '21 Sorted Patches' for A4/Letter.
At 'Paper Size', select the setting according to the previous step.
At 'Input tray', select the tray that contains the selected paper type and size.
At 'Number of copies', select 5.
Use the last print to calibrate.
At 'Show Advanced Options', check at 'Halftone' the correct screening. The default
is 'Dot1'.
3.1 Calibrate the EFI controller
Chapter 3 - Controller calibration
13
Advertisement
Table of Contents
