Table of Contents
Advertisement
Scan the rows of the coloured patches.
4.
[24] 'Place meter & hold button'
Put the meter in the square at the left side of the first row.
Press and hold the button of the meter until you hear a beep.
Move the meter across the row of patches.
Release the button of the meter.
If the scan failed, select the current colour again on the operator panel and repeat the
scan.
If the can passed, repeat the previous actions for all other colours.
3.1 Calibrate the Océ PRISMAsync controller
Chapter 3 - Controller calibration
25
Advertisement
Table of Contents
