Snmp Traps - ZyXEL Communications MES-3528 User Manual

Chapter 33 Access Control

33.3.3 SNMP Traps

The Switch sends traps to an SNMP manager when an event occurs. The following
tables outline the SNMP traps by category.
An OID (Object ID) that begins with "1.3.6.1.4.1.890.1.5.8" is defined in private
MIBs. Otherwise, it is a standard MIB OID.
Table 97 SNMP System Traps
OPTION OBJECT LABEL
coldstart coldStart
warmstart warmStart
reset UncontrolledResetEventO
n
ControlledResetEventOn
RebootEvent
timesync RTCNotUpdatedEventOn
RTCNotUpdatedEventClea
r
intrusionlo IntrusionLockEventOn
ck
loopguard LoopguardEventOn
externalar ExternalAlarmEventOn
m
ExternalAlarmEventClear
Table 98 SNMP Interface Traps
OPTION OBJECT LABEL
linkup linkUp
LinkDownEventClear
288
OBJECT ID
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.2
1.3.6.1.4.1.890.1.5.8.51.2
7.2.1
1.3.6.1.4.1.890.1.5.8.51.2
7.2.1
1.3.6.1.4.1.890.1.5.0.1
1.3.6.1.4.1.890.1.5.8.51.2
7.2.1
1.3.6.1.4.1.890.1.5.8.51.2
7.2.2
1.3.6.1.4.1.890.1.5.8.51.2
7.2.1
1.3.6.1.4.1.890.1.5.8.51.2
7.2.2
1.3.6.1.4.1.890.1.5.8.51.2
7.2.1
1.3.6.1.4.1.890.1.5.8.51.2
7.2.2
OBJECT ID
1.3.6.1.6.3.1.1.5.4
1.3.6.1.4.1.890.1.5.8.51.27
.2.2
DESCRIPTION
This trap is sent when the
Switch is turned on.
This trap is sent when the
Switch restarts.
This trap is sent when the
Switch automatically resets.
This trap is sent when the
Switch resets by an
administrator through a
management interface.
This trap is sent when the
Switch reboots by an
administrator through a
management interface.
This trap is sent when the
Switch fails to get the time and
date from a time server.
This trap is sent when the
Switch gets the time and date
from a time server.
This trap is sent when intrusion
lock occurs on a port.
This trap is sent when
loopguard shuts down a port.
This trap is sent when the
external alarm is received.
This trap is sent when the
external alarm stops sending
an alert.
DESCRIPTION
This trap is sent when the
Ethernet link is up.
This trap is sent when the
Ethernet link is up.
MES-3528 User's Guide