Link Aggregation Control Protocol - ZyXEL Communications MES-3528 User Manual

17.5 Link Aggregation Control Protocol

Click Advanced Application > Link Aggregation > Link Aggregation Setting
> LACP to display the screen shown next. See
information on dynamic link aggregation.
Figure 82 Advanced Application > Link Aggregation > Link Aggregation Setting >
LACP
The following table describes the labels in this screen.
Table 40 Advanced Application > Link Aggregation > Link Aggregation Setting >
LACP
LABEL
Link
Aggregation
Control
Protocol
Active
MES-3528 User's Guide
DESCRIPTION
Note: Do not configure this screen unless you want to enable
dynamic link aggregation.
Select this checkbox to enable Link Aggregation Control Protocol (LACP).
Chapter 17 Link Aggregation
Section 17.2 on page 151 for more
157