Configure A Static Vlan - ZyXEL Communications MES-3528 User Manual

9.5.3 Configure a Static VLAN

Use this screen to configure and view 802.1Q VLAN parameters for the Switch.
See Section 9.1 on page 91
static VLAN, click Static VLAN in the VLAN Status screen to display the screen
as shown next.
Figure 49 Advanced Application > VLAN > Static VLAN
The following table describes the related labels in this screen.
Table 16 Advanced Application > VLAN > Static VLAN
LABEL
ACTIVE
Name
VLAN Group
ID
Port
MES-3528 User's Guide
for more information on static VLAN. To configure a
DESCRIPTION
Select this check box to activate the VLAN settings.
Enter a descriptive name for the VLAN group for identification purposes.
This name consists of up to 64 printable characters.
Enter the VLAN ID for this static entry; the valid range is between 1 and
4094.
The port number identifies the port you are configuring.
Chapter 9 VLAN
97