ZyXEL Communications MES-3528 User Manual page 296

Chapter 33 Access Control
Click Management > Access Control > Logins to view the screen as shown
next.
Figure 161 Management > Access Control > Logins
The following table describes the labels in this screen.
Table 104 Management > Access Control > Logins
LABEL
Administrator
This is the default administrator account with the "admin" user name. You cannot change
the default administrator user name. Only the administrator has read/write access.
Old Password
New Password
Retype to
confirm
Edit Logins
You may configure passwords for up to four users. These users have read-only access.
You can give users higher privileges via the CLI. For more information on assigning
privileges see the CLI Reference Guide.
User Name
Password
Retype to
confirm
296
DESCRIPTION
Type the existing system password (1234 is the default password
when shipped).
Enter your new system password.
Retype your new system password for confirmation
Set a user name (up to 32 ASCII characters long).
Enter your new system password.
Retype your new system password for confirmation
MES-3528 User's Guide