ZyXEL Communications MES-3528 User Manual page 291

Table 101 SNMP Switch Traps
OPTION OBJECT LABEL
stp STPNewRoot
MRSTPNewRoot
MSTPNewRoot
STPTopologyChange
MRSTPTopologyChange
MSTPTopologyChange
mactable MacTableFullEventOn
MacTableFullEventClear
rmon RmonRisingAlarm
RmonFallingAlarm
cfm dot1agCfmFaultAlarm
MES-3528 User's Guide
OBJECT ID
1.3.6.1.2.1.17.0.1
1.3.6.1.4.1.890.1.5.8.51.36.
2.1
1.3.6.1.4.1.890.1.5.8.51.10
7.70.1
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.890.1.5.8.51.36.
2.2
1.3.6.1.4.1.890.1.5.8.51.10
7.70.2
1.3.6.1.4.1.890.1.5.8.51.27.
2.1
1.3.6.1.4.1.890.1.5.8.51.27.
2.2
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
1.3.111.2.802.1.1.8.0.1
Chapter 33 Access Control
DESCRIPTION
This trap is sent when the STP
root switch changes.
This trap is sent when the
MRSTP root switch changes.
This trap is sent when the
MSTP root switch changes.
This trap is sent when the STP
topology changes.
This trap is sent when the
MRSTP topology changes.
This trap is sent when the
MSTP root switch changes.
This trap is sent when more
than 99% of the MAC table is
used.
This trap is sent when less
than 95% of the MAC table is
used.
This trap is sent when a
variable goes over the RMON
"rising" threshold.
This trap is sent when the
variable falls below the RMON
"falling" threshold.
The trap is sent when the
Switch detects a connectivity
fault.
291