Cluster Member Switch Management - ZyXEL Communications MES-3528 User Manual

The following table describes the labels in this screen.
Table 112 Management > Cluster Management: Status
LABEL
Status
Manager
The Number
of Member
Index
MacAddr
Name
Model
Status

36.2.1 Cluster Member Switch Management

Go to the Clustering Management Status screen of the cluster manager switch
and then select an Index hyperlink from the list of members to go to that cluster
member switch's web configurator home page. This cluster member web
MES-3528 User's Guide
DESCRIPTION
This field displays the role of this Switch within the cluster.
Manager
Member (you see this if you access this screen in the cluster member
switch directly and not via the cluster manager)
None (neither a manager nor a member of a cluster)
This field displays the cluster manager switch's hardware MAC address.
This field displays the number of switches that make up this cluster. The
following fields describe the cluster member switches.
You can manage cluster member switches via the cluster manager switch.
Each number in the Index column is a hyperlink leading to the cluster
member switch's web configurator (see
This is the cluster member switch's hardware MAC address.
This is the cluster member switch's System Name.
This field displays the model name.
This field displays:
Online (the cluster member switch is accessible)
Error (for example the cluster member switch password was changed or
the switch was set as the manager and so left the member list, etc.)
Offline (the switch is disconnected - Offline shows approximately 1.5
minutes after the link between cluster member and manager goes down)
Chapter 36 Cluster Management
Figure 176 on page 316).
315