Programming Stations; Accessing The Station; Automatic Saving; Running Through Saved Stations - Silvercrest KH 2375 Operating Instructions Manual

Programming stations

BND/ENT
• Press the button to set a band range.
In each range you can save six stations.
• Search for the station that you want to save.
• After the search has found a station press one of
the station buttons 1-6 for approx. three seconds.
The brief switching off of the sound indicates that
the station is saved.
The device switches back to radio playback after a
few seconds.

Accessing the station

BND/ENT
• Select with
• By pressing one of the station buttons 1-6 you
access the saved station again.

Automatic saving

A/PS
• Hold down the
starts whereby each found station remains for
approx. five seconds. The blinking number in the
display shows the number of the station button,
on which will be saved the respective station.
With weak stations the search will automatically
continue.
• Whilst the search is stopped press a station button
to save the station on another memory position.

Running through saved stations

• You can access the saved stations of the current
station range.
BND/ENT
• Select with
A/PS
• Press briefly the
briefly selected.
• When you hear the desired station press briefly
A/PS
the button.

Alternative Frequency (AF)

You can search for alternative frequencies of a station
so that it will always have optimal reception.
the band range.
button. A search immediately
the band range.
button. All stations will be
AF
• Press the button. The notice AF appears in the
display. Now the radio will always search for
the optimal radio frequency of the currently set
station.
Regional programmes
A few stations broadcast regional programmes.
• In order to playback only the station's regional
programme hold down the
notice REG ON appears in the display.
• To again playback the national programme hold
AF
down the button until the notice REG OFF ap-
pears in the display.
PTY (Programme Type Code Program-
me type/kind identification)
For this function the EON function must be switched
on.
• To activate the PTY search press the
In the display the notice PTY appears.
With the station search only stations of the currently
selected PTY identification (see the PTY identification
table) will be considered.
• To deactivate the PTY search press the
again.
Setting the PTY identification
• Hold down the
controller to set the individual PTY identifications.
Station search by PTY identification
• During the display of a PTY identification if you press
PTY
briefly the button or the buttons
immediately starts for stations, which correspond to
this PTY identification.
If no station is found that corresponds to this PTY
identification the notice NOT FND appears briefly
and then the search ends with the last set station.
- 12 -
AF
button until the
PTY
PTY
button and then turn the multi
/
button.
PTY
button
a search