Table of Contents
Advertisement
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports have two LEDs. On
each port, one LED indicates activity
while the other LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
IPMI Dedicated LAN LEDs
A dedicated IPMI LAN is also lo-
cated on the I/O backplane of the
serverboard. The amber LED on the
right indicates activity, while the green
LED on the left indicates the speed of
the connection. See the table at right
for more information.
Onboard Power LED
An Onboard Power LED is located at
LED8 on the serverboard. When this
LED is lit, the system is on. Be sure
to turn off the system and unplug the
power cord before removing or install-
ing components. See the table at right
for more information.
BMC Heartbeat LED
A BMC Heartbeat LED is located at
D10 on the serverboard. When D10
is blinking, BMC functions normally.
See the table at right for more infor-
mation.
Chapter 5: Advanced Serverboard Setup
LAN1/2 LED
(Connection Speed Indicator)
LED Color
Off
Green
Amber
IPMI LAN (F models only)
Link LED
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State
Link (Left)
Green: Solid
Activity (Right)
Amber: Blinking
Onboard PWR LED (LED8)
LED Color
Defi nition
Off
System Off (PWR cable
not connected)
Green
System On
Green:
ACPI S1 State
Flashing
Quickly
Green:
ACPI S3 (STR) State
Flashing
Slowly
BMC Heartbeat LED
Color/State
Green:
Blinking
5-21
Defi nition
NC or 10 Mb/s
100 Mb/s
1 Gb/s
Activity LED
Defi nition
100 Mb/s
Active
Status
Defi nition
BMC: Normal
Advertisement
Table of Contents
