Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 8025C-3R. In-
stallation and maintenance should be performed by experienced technicians only.
The SuperServer 8026B-6RF/8026B-TRF is a high-end quad processor server
based on the SC828TQ-R1400LP 2U rackmount server chassis and the Super
X8QB6-F/X8QBE-F serverboard. The X8QB6-F/X8QBE-F supports four Intel®
Xeon processors. Please refer to our web site for an up-to-date list of supported
processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X8QB6-F/X8QBE-F
serverboard and the SC828TQ-R1400LP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the server into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without the processor and memory components, this chapter will refer
you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface
Advertisement
Table of Contents
