S
S
UPER
ERVER 8026B-6RF/8026B-TRF User's Manual
5-7
Installing PCI Add-On Cards
The 8026B-6RF/8026B-TRF can accommodate low-profi le (only) add-on cards
installed into all the PCI slots included on the X8QB6-F/X8QBE-F.
You will need to fi rst power off the system before installing add-on cards.
Installing an Add-on Card
1.
Begin by removing the PCI slot shield for the slot you wish to populate.
2.
Fully seat the card into the riser card slot, pushing down with your thumbs
evenly on both sides of the card.
3.
Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
5-10