Table of Contents
Advertisement
SUPERSERVER 6017R-M7UF/6017R-M7RF User's Manual
5-11 Onboard Indicators
LAN Port LEDs
The LAN1/2 Ethernet ports each have
two LEDs. One right LED indicates ac-
tivity when blinking while the other LED
may be green, amber or off to indicate
the speed of the connection. See the
table on the right for the functions as-
sociated with the connection speed LED.
IPMI Dedicated LAN LEDs
The IPMI LAN port has two LEDs as
well. The amber LED on the right indi-
cates activity, while the green LED on
the left indicates the speed of the con-
nection. See the table at right for more
information.
Rear UID LED
The rear UID LED (LED1) is located
on the backplane This LED is used in
conjunction with the front UID LED on
the front control panel and the rear UID
switch to provide easy identifi cation of a
system that might be in need of service.
Refer to UID button/LED in Section 5-9
for more information.
Onboard Power LED
An Onboard Power LED is located at
LED2 on the serverboard. When this LED
is on, the system is on. Be sure to turn off
the system and unplug the power cord
before removing or installing components.
See the table at right for more information.
Link LED
LAN LED
(Connection Speed Indicator)
LED Color
Defi nition
Off
No Connection or 10 Mb/s
Green
100 Mb/s
Amber
1 Gb/s
IPMI LAN
Link LED
IPMI LAN Link LED (Left) &
Activity LED (Right)
LED
Color/State
Link (Left)
Activity
(Right)
Onboard PWR LED Indicator
LED States
LED Color
Off
System Off (PWR cable
not connected)
Green
System On
Green:
ACPI S1 State
Flashing
Quickly
5-22
Activity LED
Activity LED
Defi nition
Green: Solid
100 Mbps
Amber: Blink-
Active
ing
Defi nition
Advertisement
Table of Contents
