Appendix B System Specifi Cations - Supero SUPERSERVER 8026B-6RF User Manual

High-end quad processor server
Table of Contents

Advertisement

Appendix B: System Specifi cations
Appendix B
System Specifi cations
Processors
Four Intel® Xeon® 7500 Series processors inLGA-1567 sockets
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
Intel 7500 + ICH10R
BIOS
32 Mb AMIBIOS® Flash ROM
Memory Capacity
Supports up to 512 GB of registered ECC DDR3-1333/1066/978/800 memory.
(DDR-1333 memory will run at 1066 MHz.)
Note: See the memory section in Chapter 5 for details.
SAS Controller (8026B-6RF only)
Onboard LSI 2108 SAS controller supports eight 6 Gbps SAS hard drives (RAID
0, 1, 5, 6, 10, 50 and 60 are supported)
SATA Controller
SATA controller integrated into the South Bridge (ICH10R) section of the chipset
provides a six-port 3 Gbps SATA subsystem, which is RAID 0, 1, 5 and 10
supported (RAID 5 supported by Windows only)
Drive Bays
Six hot-swap drive bays to house six standard SAS or SATA drives
Peripheral Drives/Bays
One (1) slim DVD-ROM drive
Expansion Slots
Supports the use of two PCI-E 2.0 x16 or one PCI-E 2.0 x16 and two PCI-E 2.0
x8 slots or four PCI-E 2.0 x8 add-on cards (all must be low-profi le)
B-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 8026b-trf

Table of Contents