Security Settings - Supero SUPERSERVER 8026B-6RF User Manual

S S
UPER ERVER 8026B-6RF/8026B-TRF User's Manual
7-4

Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set fi rst.
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Select Full Access to grant full User read and write access to the Setup Utility.
Select View Only to allow the user to access to the Setup Utility without chang-
ing the fi elds. Select Limited to allow the user to access and change limited fi elds
such as Date and Time. Select No Access to prevent the user from accessing the
Setup Utility.
Change User Password
Select this feature and press <Enter> to access the submenu and enter a new
User Password.
Clear User Password (Available only when User Password has been set)
This item allows you to clear a user password after it has been entered.
7-30