Administrator Password - Sharp MX-FXX1 Manual

System Settings
Admin Password
Enter the administrator password.(From 5 to 32 characters)
Password
2
3
This step is not necessary if you are logging in after you pressed the [SYSTEM SETTINGS] key.
System Settings
Total Count
Tray Settings
Printer
Condition Settings
System Settings
User Control
Device Control
Printer Settings
4
System Settings
List Print
(Administrator)
Field Support
System
Storing/Calling
of System Settings
• For detailed explanations of each of the settings, see the following pages of this chapter.
• Items marked (A) above are indicated as "System Settings (Administrator)" in this manual to distinguish them from
the general user system settings.
• If Auto Clear activates, logout will automatically take place.
• To logout...
Press the [LOGOUT] key (
Cancel
(1)
SYSTEM
SETTINGS
List Print
Default Settings
(User)
Fax Data
Address Control
Receive/Forward
Document
USB-Device Check
Filing Control
Energy Save Operation Settings
Copy Settings Network Settings
Image Send Document Filing
Settings Settings
(A)
Enable/Disable
Security Settings
Settings
Change Admini-
Product Key
strator Password
(A)
). (Except when entering a fax number.)
Enter the administrator password.
OK
(1) Touch the [Password] key and enter the

administrator password.

(2) Touch the [OK] key.
(2)
Press the [SYSTEM SETTINGS] key.
Configure the desired system settings.
Exit
Touch the items that you wish to configure and select the
1/3
desired settings.
Exit
2/3
Exit
3/3
165