Fax Transmission Sequence - Sharp MX-FXX1 Manual

FAX TRANSMISSION SEQUENCE

This section explains the basic procedure for sending a fax.
Scan
Mode Switch
Image
Internet Fax
Settings
Send Settings
USB Mem. Scan
PC Scan
Fax
Auto
Mode Switch
Exposure
Image
Settings
Standard
Resolution
Memory TX
Direct TX
Auto
Original
Auto Reception
Fax Memory:100%
Place the original.
Change the mode.
Fax Address Book
Address Entry
Special Modes
File
Data Entry
Quick File
Select image settings.
Address Book
Sub Address
Special Modes
A4
File
Special Modes
Quick File
Place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
Change to fax mode.
Touch the [Mode Switch] key and then touch the [Fax] key.
☞
BASE SCREEN OF FAX MODE
Touch the [Image Settings] key to select settings for the
original to be faxed.
• [Exposure] key: Use this key to adjust the exposure of the
image.
☞
• [Resolution] key: Use this key to adjust the resolution of the
image.
☞
• [Original] key: Use this key to select the original size, the
original send size and two-sided original
scanning.
☞
SPECIFYING THE ORIGINAL SCAN
SIZE AND SEND SIZE (Enlarge/Reduce
Sending)
SCANNING BOTH SIDES OF AN
ORIGINAL (2-sided original)
• [Special Modes] key: Touch this key to use a convenient
11
(page 6)
CHANGING THE EXPOSURE
29)
CHANGING THE RESOLUTION
(page 28)
(page 30), AUTOMATICALLY
special mode.
(page
(page 34)