60
TRAILERING
!
When trailering the outboard motor
should be in a vertical (normal running)
1
position, fully down. Trailering in the
tilted position may cause damage to the
outboard motor, boat, etc.
If trailering with outboard motor fully
2
down is not available (the gear case
skeg is too close to the road in a
vertical position), fix the outboard motor
3
securely using a device (like a transom
saver bar) in the tilted position.
4
5
6
7
8
9
!
The tilt support device supplied on
10
your outboard motor is not intended
for trailering. It is intended to support
the outboard motor while the boat is
11
docked, beached, etc.
12
13
14
�������
�������