TOHATSU MD 30B2 Owner's Manual page 33

Outboard motor
Hide thumbs Also See for MD 30B2:
Table of Contents

Advertisement

Engine Oil
U s e a g e n u i n e e n g i n e o i l o r
recommended one . Refer to your
Distributor.
Will not recommend use of other two
stroke engine oil.
�������
!
Do not mix different brands of oil.
Mixing different brands of oil, or
different types of oil even if the brand is
the same, may cause gelling, resulting
in possible filter screen blockage. This
could result in serious engine damage
because of impaired lubrication
performance.
�������
!
THE ENGINE OIL IS DRAINED FOR
SHIPPING FROM THE FACTORY. BE
SURE TO FILL THE ENGINE TO THE
PROPER LEVEL BEFORE STARTING
ENGINE. (TO PROPERLY FILL THE
ENGINE WITH OIL FOLLOW THE
INSTRUCTIONS IN SECTION 9 OF
THIS MANUAL)
Note
Use of engine oils that do not meet
these requirements will result in
reduced engine life, and other engine
problems.
PRE-OPERATING PREPARATIONS
The required amount of engine oil is
automatically supplied from the oil
tank, through the oil pump, according
to the engine running conditions.
Gasoline is fed over a separate
feeding line.
�������
!
In the unlikely event that gasoline
by mistake is filled into the oil tank,
drain the oil tank completely, and
consult an authorized service shop
for advice.
Check the amount of oil in the oil
tank visually before starting the
engine. Running out of oil at sea is
a cause for potential disaster.
33
1
2
3
4
5
6
7
8
9
10
11
12
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Md 115b2Md90c2Md 115a2Md 75c2

Table of Contents