Trim Angle - TOHATSU MD 30B2 Owner's Manual

52
ENGINE OPERATION

6. Trim angle

The following instructions explain how
1 to set the best trim angle of the boat.
EFO type
2
The trim angle is adjusted by setting
the thrust rod in the correct thrust rod
hole.
3
Proper trim angle
The trim angle is optimum when the
4
boat is parallel to the water surface
while running.
5
6
7
Improper trim angle (bow rises too
high)
If the trim angle is excessive, the
8
bow will rise out of the water and the
speed will decrease.
9
Furthermore, the bow may sway or
the bottom may slam the water while
cruising.
10
In this case, decrease the trim angle
by setting the thrust rod in a lower
11
hole.
12
13
14
Perpendicular to the
water surface
Thrust rod
Select a lower hole
Improper Trim Angle (bow dips into
the water)
If the trim angle is too small, the bow
will dip into water, the speed will
decrease, and water may enter the
boat.
In this case, the trim angle should be
increased by setting the thrust rod in
a higher hole.
upward
Select a higher hole