Engine Operation; Starting - TOHATSU MD 30B2 Owner's Manual

Outboard motor
Hide thumbs Also See for MD 30B2:
Table of Contents

Advertisement

ENGINE OPERATION

1. Starting

�������
!
In case engine starts in gear, do not
start cruising. Stop engine immediately
and consult an authorized dealer.
Note
The engine will not start unless
the switch lock has been properly
connected into the emergency stop
switch.
�������
!
Do not operate the engine with gear
case out of water.
Severe personal injury, or engine
damage will result.
�������
!
Never fill up portable fuel tanks on board
to avoid fire or explosion resulting from
spilled gasoline. If gasoline is ever spilled
on board, wipe it up thoroughly. Fuel
tanks must always be filled up on land.
Preparations
air vent screw
Loosen the air vent screw on the
tank cap.
For the 30, 40 and 50 models,
insert the fuel connector into the
connector in the engine side.
30 · 40 · 50
For the 115 model, remove the cap
from the fuel hose nipple and then
connect the hose coming from the
fuel tank.
After connection, be sure to fasten
the hose tightly with a hose band
or the like.
90C 115
Cap
Fuel hose nipple
Fuel hose in fuel tank side
39
1
2
3
4
5
6
7
8
9
10
11
12
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Md 115b2Md90c2Md 115a2Md 75c2

Table of Contents