Adaptation To Different Types Of Gas - Smeg Oven Instructions For Use Manual

12. ADAPTATION TO DIFFERENT TYPES OF GAS

BEFORE PERFORMING ANY OPERATIONS, SWITCH OFF THE POWER
SUPPLY TO THE APPLIANCE.
Appliance set for gas:
In case of operation with other types of gas, the burner nozzles must be changed
and the minimum flame adjusted on the gas taps.
To change the nozzles, proceed as described in the following paragraphs.
12.1 Replacing the hob nozzles
1 Remove the pan stands, and
remove all burner caps and
flame-spreader crowns to access
the burner casings.
2 Unscrew the nozzles using a 7
mm socket wrench.
3 Replace
according to the type of gas to be
used (see 12.2 Burner and
nozzle characteristics table).
4 Replace the burners in the correct position.
12.2 Burner and nozzle characteristics table
For burner arrangement, see "Instructions for the user - 6.4 Cookware diameters".
Burner
1
Auxiliary
2
Semi-rapid
3
Rapid
4
WOK
5
Fish pan
Burner
1
Auxiliary
2
Semi-rapid
3
Rapid
4
WOK
5
Fish pan
Instructions for the installer
the burner nozzles
Nominal gas
Consumption (MJ/h)
3.9
7.5
12
15.2
7.8
Nominal gas
Consumption (MJ/h)
3.9
6.3
10.8
15.2
6.8
(see label on product)
NG – 1.0 kPa
NG – 1.0 kPa
Turn-down gas
consumption (MJ/h)
1.3
1.6
2.7
5.7
2.9
ULPG – 2.75 kPa
Turn-down gas
consumption (MJ/h)
1.3
1.6
2.7
5.7
2.9
EN
Injector
(mm)
0.90
1.20
1.55
0.80 + 1.65
1.26
Injector
(mm)
0.54
0.68
0.88
0.46 + 0.94
0.72
43