Safety Precautions - Smeg Oven Instructions For Use Manual

Hide thumbs Also See for Oven:
Table of Contents

Advertisement

General instructions
EN

2. SAFETY PRECAUTIONS

Consult the installation instructions for safety standards on electrical or gas appliances
and for ventilation functions. In your interests and for your safety the law requires that the
installation and servicing of all electrical and gas appliances be carried out by qualified
personnel in accordance with the standards in force. Our approved installers guarantee a
satisfactory job.
Gas or electrical appliances must always be uninstalled by suitably skilled people.
Before connecting the appliance to the power grid, check the data on the plate against the
data for the grid itself.
If the appliance is installed on a raised platform, secure it using suitable fastening
systems. DO NOT MODIFY THIS APPLIANCE.
Before carrying out installation/maintenance work, make sure that the appliance is
disconnected from the power grid.
If cooking appliances are installed in motor vehicles (for example, camper vans, caravans
etc.), they must only be used when the vehicle is stationary. NOT FOR USE IN MARINE
CRAFT, CARAVANS OR MOBILE HOMES UNLESS EACH BURNER IS FITTED WITH
A FLAME SAFEGUARD.
Where this appliance is installed in marine craft or in caravans, it shall not be used as a
space heater.
Install the appliance so that when opening the drawers or doors of units positioned at the
level of the hob there is no possibility of making contact with pans positioned on top of it.
Immediately after installation, carry out a quick test on the appliance following the
instructions provided later in this manual. Should the appliance not function, disconnect it
from the power supply and call the nearest technical assistance centre.
The plug to be connected to the power supply cable and its socket must be of the same
type and conform to the standards in force. The socket must be accessible after the
appliance has been installed.
Never disconnect the plug by pulling on the cable.
If the power supply cable is damaged, contact the technical assistance centre immediately
and they will replace it.
The appliance must be connected to earth in compliance with electrical system safety
standards.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents