Basic device configuration
Configuring the MGC list
●
the G250/G350
Setting reset times
●
reestablish a connection with its MGC
Accessing the registered MGC
●
the CLI
Monitoring the ICC or LSP
●
G250/G350 and its registered MGC using the CLI
The Media Gateway Controller (MGC)
The Media Gateway Controller (MGC) controls telephone services on the Avaya G250/G350
Media Gateway. You can use a media server with Avaya Communication Manager software as
an MGC. The G250/G350 supports both External Call Controllers (ECC) and Internal Call
Controllers (ICC). An ICC is an Avaya S8300 Media Server that you install in the G250/G350 as
a media module. An ECC is an external media server that communicates with the G250/G350
over the network.
When the G250/G350 uses an ECC, it can use a local S8300 as a backup controller for
Enhanced Local Survivability (ELS). The S8300 functions in Local Survivable Processor (LSP)
mode. If the ECC stops serving the G250/G350, the S8300 takes over the service. For
information on Standard Local Survivability (SLS) and other backup features, see
and migration options
Table 2
lists the media servers that can be used with the G250/G350.
Table 2: Media servers supported by the Avaya G250/G350 Media Gateway
To register the G250/G350 with an MGC, you need the G250/G350's serial number. You can
find this serial number in one of the following ways:
Use the show system command
●
Look for a 12-character string located on a label on the back panel of the G250/G350
●
60 Administration for the Avaya G250 and Avaya G350 Media Gateways
— instructions on how to register primary and backup MGCs for
— instructions on how to set time-outs for when the G250/G350 has to
— instructions on how to monitor the connection between the
on page 61.
Media server
Avaya S8300 Media Server
Avaya S8500 Media Server
Avaya S8700 Media Server
— instructions on how to access the registered MGC using
Type
Media module
External
External
Survivability
Usage
ECC, ICC, or LSP
ECC
ECC