Saving Configuration Changes - Avaya G250 Administration

Configuration overview
You can also use the Avaya G350 Manager to configure most features of the G350. The Avaya
G350 Manager is a GUI application. You can access the Avaya G350 Manager from Avaya
Integrated Management software or from a web browser. Most of the commands that are
available through the G350 CLI are also available through the Avaya G350 Manager. For more
information about the Avaya G350 Manager, see the Avaya G350 Manager User Guide,
650-100-709.
Note:
There is currently no device manager available for configuring the G250.
Note:

Saving configuration changes

When you make changes to the configuration of the Avaya G250/G350 Media Gateway, you
must save your changes to make them permanent. The G250/G350 has two sets of
configuration information:
Running configuration
●
Startup configuration
●
The G250/G350 operates according to the running configuration. When the G250/G350 is
reset, the G250/G350 erases the running configuration and loads the startup configuration as
the new running configuration. When you change the configuration of the G250/G350, your
changes affect only the running configuration. Your changes are lost when the G250/G350
resets if you do not save your changes.
Use the copy running-config startup-config command to save changes to the
configuration of the G250/G350. A copy of the running configuration becomes the new startup
configuration.
You can back up either the running configuration or the startup configuration to an FTP or TFTP
server on your network. You can restore a backup copy of the configuration from the FTP or
TFTP server. When you restore the backup copy of the configuration, the backup copy
becomes the new running configuration on the G250/G350. For more information, see
Managing configuration files
30 Administration for the Avaya G250 and Avaya G350 Media Gateways
on page 76.