Enabling And Disabling Sls On The G250 - Avaya G250 Administration

Media gateway

Hide thumbs Also See for G250:

Table of Contents

Configuring SLS

4. Use the Backup/Restore page to save PIM data, including the SLS data set. SLS data

cannot be saved independently of the PIM data.

Figure 9: Backup/Restore page (PIM)

Enabling and disabling SLS on the G250

To enable SLS on the G250, type the set survivable-call-engine enable command.

The G250 responds with "Survivable Call Engine is enabled."

To disable SLS on the G250, type the set survivable-call-engine disable command.

The G250 responds with "Survivable Call Engine is disabled."

Issue 1.1 June 2005