Smeg Hob Instructions For The Installer page 35

8.6 Before starting the oven automatic cleaning cycle
Pyrolysis may be carried out at any time of the day or night (if you wish to
benefit from the lower cost of electricity overnight).
•
•
•
•
Refer to the following diagram for setting the cleaning cycle duration:
CLEANING
DURATION
During the automatic cleaning cycle, the fans produce a more
intense level of noise due to a greater rotation speed; this is entirely
normal and intended to facilitate heat dissipation.
At the end of pyrolysis, the fans will continue to operate for long enough
to avoid overheating the walls of adjacent units and the front of the oven.
During the automatic cleaning cycle, the fans produce a more intense level
of noise due to a greater rotation speed; this is entirely normal and
intended to facilitate heat dissipation.
At the end of pyrolysis, the fans will continue to operate for long enough to
avoid overheating the walls of adjacent units and the front of the oven.
You are advised not to carry out a pyrolysis cycle lasting less than 120
minutes
Instructions for the user
Completely remove all accessories from inside the oven.
Remove the guide frames.
At the end of the cleaning cycle, when the oven has cooled
down, reinsert the frames by repeating the previously used
procedure in reverse order.
Make sure that the oven door is firmly closed.
LIGHT DIRT
120 min
MEDIUM DIRT
165 min
HEAVY DIRT
210 min
75