Smeg Hob Instructions For The Installer page 13

Table of Contents

Advertisement

Instructions for the user
Cooking start: as well as setting a cooking duration, the cooking start
time can also be set (with a maximum delay of 12 hours in relation to the
current time). To set the cooking start/end time, proceed as follows.
Set the cooking duration as described in the previous point.
-
Within 5 seconds of the last pressure on the
the
button again to set the cooking end time. The symbol
the current time will flash on the display, with internal segments
illuminated to show the end of cooking time. Use the
buttons to set the cooking end time.
-
5 seconds after the last button is pressed, the display will show the
current time and the cooking start and end times, which will be
represented by the illuminated inside segments. The display
segments will be constantly illuminated as long as the current time is
not the same as the cooking start time; as soon as the current time
reaches the set starting time, the inside segments will start to flash,
indicating that the oven has started cooking.
-
At the end of the cooking time the timer will switch the oven heating
elements off, the beeps will start to sound and the numbers on the
dial will flash.
-
To cancel the whole program set, press the central button
seconds; if cooking has already started, the oven will have to be
switched off manually.
-
Here we can see a programming example: the
current time is 7:06 and cooking is programmed
to start at 8.00 and end at 9.00.
-
At 8 o'clock the inside segments between 8 and
9 will start to flash, while the hours hand will
remain still.
Warning: for the oven to start cooking operations after the
programming procedures just described, the thermostat and
functions switch knob must be correctly set on the desired
temperature and function.
3.2.4 Reduced display brightness
To reduce energy consumption when the appliance is in standby, press
to set the reduced display brightness mode. To return to the normal
brightness level, press
again.
or
buttons, press
and
and
for 2
1
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents