Smeg Hob Instructions For The Installer page 10

3.2 Electronic Analogue Clock (on some models only)
At the end of each completed programming operation, 10 beeps will
sound 3 times at intervals of about 1 minute. This sequence can be
stopped at any time by pressing any button.
3.2.1 Setting the time
When the oven is used for the first time, or after an interruption in the
electricity supply, the display flashes at regular intervals. Press the key
to stop the display flashing. Press the key again for 2 seconds; it will
now be possible to begin adjusting the current time. Press the value
modification buttons
minute for each pressure. Press one of the two value modification buttons
until the current time appears. 5 seconds after the last button is pressed,
the clock will start from the time set.
50
Instructions for the user
LIST OF FUNCTIONS
TIMER BUTTON
END OF COOKING BUTTON
CLOCK ADJUSTMENT AND RESET
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
or to increase or decrease the setting by one