Mercedes-Benz Vito Operating Instructions Manual page 71

i
After serious malfunctions or if the battery
has been disconnected, close the sliding door
fully once.
Opening/closing using the switch
Observe the notes on anti-entrapment pro-
e
tection ( page 70).
Sliding door switch on the centre console
1 To close the sliding door/to program
the key
2 To open the sliding door
Sliding door switch in the doorway
3 To open/close the sliding door
E
To open: briefly press the lower sec-
tion of switch 2 on the centre console
or the switch in doorway 3.
The indicator lamp in the switch
flashes. The sliding door unlocks and
opens.
E
Again briefly press the lower section of
switch 2 on the centre console or the
switch in doorway 3.
The sliding door stops moving.
i
If you have stopped the sliding door before
it was fully open by pressing a control during
opening, the sliding door will be closed the next
time the sliding door is operated using the
switch in the doorway or the remote control in
the key.
Nur fuer internen Gebrauch
Opening and closing
E
To close: briefly press the upper sec-
tion of switch 1 on the centre console
or the switch in doorway 3.
The indicator lamp in the switch
flashes. The sliding door closes and
you will hear a signal.
E
Again press the lower/upper section of
the switch on the centre console or the
switch in doorway 3.
The sliding door stops moving.
Proceed as follows in the event of unfav-
ourable operating conditions, e.g. frost,
ice or heavy dirt:
E
To open: press and hold the lower sec-
tion of switch 2 on the centre console
or the switch in doorway 3.
The indicator lamp in the switch
flashes. The sliding door unlocks and
opens.
E Release switch 2 on the centre con-
sole or the switch in doorway 3 once
the sliding door has reached the de-
sired position.
The sliding door stops moving.
Controls
3
ee
69