Step 7: Play Along With The Music - Tascam GB-10 Owner's Manual

Step 7: Play along with the music

This unit will output the sound of a connected guitar even
when recording is not enabled. This allows you to play along
on your guitar or bass just by selecting a song and pressing
the button.
Á
This unit also has the following functions, which you can use
as you like to make practicing your instrument even easier.
ª Use repeat playback
You can use two types of repeat playback. You can either play
a loop between two set points or play an entire song and the
entire playback area repeatedly.
Use the LOOP button for loop playback, which is useful for
practicing a phrase repeatedly.
During playback (or when paused), press the LOOP button
briefly at the point where you want to start loop playback to
set the IN point. Then, press the LOOP button briefly again
at the point where you want to stop loop playback to set the
OUT point and start loop playback of the interval between the
points.
Press and hold the LOOP button to open the
pop-up screen where you can make fine adjustments to the
IN and OUT points. Other loop playback functions include, for
example, the possibility of setting up to five loops for each file
when the playback area is the playlist.
For details about loop playback see "Using loop playback
(standard mode)" on page 68 and "Using loop playback with
the playlist" on page 69.
For repeat playback of a single file or the entire playback area,
press the MENU button to open the
and press the Á or ¯
MODE
buttons to select
1 REPEAT
After making the setting, press the HOME button to return to
the Home Screen.
Quick Start Guide
LOOP SET
screen, select
MENU
button. Use the VALUE (+/–)
or .
ALL REPEAT
TASCAM GB-10
PLAY
15