Tascam GB-10 Owner's Manual page 75

TONE
Set the tone.
CAB
Set the amplifier cabinet size.
The values shown indicate the number of speakers and the
speaker diameter simulated.
For example, "4x10" indicates four 10-inch speakers.
REVERB
Adjust the volume of the reverberation.
12-Using the built-in effects
CMP tab
Make compressor settings on this tab.
Use the BROWSE and
§ ¶
/
use the VALUE (+/–) buttons to change the setting.
COMP
Adjust the amount of compression. This makes the volume
level of the input sound more consistent and increases
sustain.
ATTACK
Set how quickly the compressor starts taking effect. The
higher the value is, the longer it takes for the compressor
to start.
LEVEL
Adjust the volume of the compressor.
ON/OFF
This turns this effect on and off.
/ buttons to select an item, and
TASCAM GB-10
75