19-Messages - Tascam GB-10 Owner's Manual

The following is a list of the popup messages that might appear on the GB-10 under certain conditions. Refer to this list if one of
these popup messages appears and you want to check the meaning or determine a proper response.
Message
File Name ERR
Dup File Name
File Not Found
Non-Supported
Battery Empty
I/O Too Short
File Not Found
PLAYLIST
No PLAYLIST
PLAYLIST Full
MBR Error Init
CARD
The DIVIDE function would cause the file name to exceed 200 characters. The DIVIDE function adds
"_a" or "_b" to the end of the file name. Before choosing the DIVIDE function, connect the unit to a
computer and edit the file name to less than 198 characters.
The DIVIDE function would cause the file name to be the same as that of an existing file. The DIVIDE
function adds "_a" or "_b" to the end of the file name. Before choosing the DIVIDE function, connect
the unit to a computer and edit the file name.
The file added to the playlist cannot be found or a file could be damaged. Please check the file in
question.
The audio file is not a supported format. Please see "11-Transferring songs to and from a computer"
for file formats that this unit can use.
The battery is almost out of power. Replace the AA batteries.
The IN(starting) and OUT(ending) points are too close together. Reset the IN(starting) and OUT(ending)
points with at least 1 second between them.
The file in the Playlist cannot be found. Please confirm that the file is still in the Music Folder.
No files have been added to the Playlist. Add a file to the Playlist or change the play mode to
something besides PLAYLIST.
The playlist is full. You cannot add more than 99 tracks to the Playlist.
The card is not formatted properly or the formatting is broken. Change the card or press the
button
Á
when this message appears to format the card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the card.
Meaning and response
19–Messages
TASCAM GB-10
89