Tascam GB-10 Owner's Manual page 32

2–Names and Functions of Parts
6 Power supply status
When the unit is being operated on battery power, a
battery ( ) icon is shown.
The amount of remaining battery charge is shown by the
number of bars in the icon (
When almost no battery charge is remaining, the empty
battery ( ) icon blinks. When this happens, the unit will
soon switch to standby.
When using a TASCAM PS-P520 AC adaptor (sold
separately) or USB bus power, the AC (
NOTE
Even when some battery charge is remaining, a "
" pop-up message might appear if you try to start
Low
recording or another operation that requires a lot of power.
7 Recorder operation status
Depending on the recorder operation status, one of the
following icons appears.
ª Stopped
π
Paused
Á Playing back
 Searching forward
Ô Searching backward
¯ Skipping to the beginning of the next file
 Skipping to the beginning of the previous file
32
TASCAM GB-10
, , ).
) icon is shown.
Battery
8 Playback position
This bar shows the current playback position. As playback
proceeds, the darkened bar extends from the left.
9 Playback interval
This shows the loop playback IN point (starting point) and
OUT point (ending point) settings.
When a starting point is set, the "
corresponding position beneath the playback position bar.
When an ending point is set, the "
corresponding position beneath the playback position bar.
0 File information
This shows the name of the file being played back. If an
MP3 file has ID3 tag information, that information is shown
instead.
NOTE
ID3 tag information is title and artist name information that
can be stored in an MP3 file.
q Playback area
This shows the currently selected playback area.
All files in the MUSIC folder
ALL
All files in the selected folder
FOLDER
All files added to the playlist
P.LIST
" icon appears at the
" icon appears at the