Using Loop Playback With The Playlist - Tascam GB-10 Owner's Manual

10-Loop Playback/Repeat Playback/Single Track Playback
NOTE
When the pop-up window is open, press the
•
LOOP SET
button to playback, press
or button briefly to search the file.
Ô 
Press and hold the
Ô
•
(starting) or OUT (ending) point. (This is not possible when
there is no IN (starting) and OUT (ending) point.)
Press the [ ] button during playback to pause, and
ª
•
press the HOME button when paused to returned to the
Home Screen.
5. Next, use the same buttons to move the OUT(ending)
point to the desired position, and press the
to save the OUT(ending) point.
NOTE
Use the and buttons to switch between IN
 ¯
•
(starting) and OUT (ending) points.
[ ª ]button to, and press the
or button to move the IN

¯
6. Press the LOOP button briefly to start loop playback.
Á

Using loop playback with the playlist

When the playback area is set to playlist, up to 5 loops with
distinct IN (starting) and OUT (ending) points can be set per
file.
button
Follow the procedures below to set and play back loops of
desired intervals in a file.
Loop settings for a file are saved until it is removed from the
playlist.
1. Press the LOOP button to show the LOOP setting
area at the bottom of the display. The word "
followed by a number. Use the VALUE (+/–) buttons to
set the number to 1–5.
" is
LOOP
69
TASCAM GB-10