Step 8: Record Your Performance - Tascam GB-10 Owner's Manual

Quick Start Guide
For details about repeat playback, see "Repeat and single track
playback" on page 71.
ª
Change the key
You can change the playback pitch (key) in semitones. Press
the KEY button to show the key setting at the bottom of the
display.
Use the VALUE (+/–) buttons to change the setting value.
For details, see "Changing the key" on page 66.
ª
Changing the speed
You can also change the playback speed without changing
the pitch.
You can, for example, reduce the speed to practice a song and
gradually increase it as you become more proficient.
Press the SPEED button to show the speed setting at the
bottom of the display.
16
TASCAM GB-10
Use the VALUE (+/–) buttons to change the setting value.
For details, see "Changing the speed" on page 66.

Step 8: Record your performance

You can record the sound input through the GUITAR IN jack.
Press the RECORD [
– ] button to start recording. (except when
the auto-record function is on and the input level is below the
set value). Press and hold the RECORD [
the pre-record function and put the unit into recording
standby. Press the RECORD [
capturing sound up to 2 seconds before pressing the button.
Press the [ ] button to stop recording.
ª
For details, see "Recording" on page 46.
] button to enable
–
– ] button to start recording,