Tascam GB-10 Owner's Manual page 28

2–Names and Functions of Parts
o METRONOME button
Press to use the metronome.
Press this button to cycle through the
settings in order.
LEVEL
Use the VALUE (+/–) buttons to change the value of each
setting.
For details, see Chapter 14 "Using the Metronome" on page
79.
p LOOP button
When the playback area is not set to playlist, press this
button briefly to set the IN point (loop playback starting
point) at the current location. Press briefly again to set the
OUT point (loop playback ending point) and start loop
playback.
Press briefly again to turn the loop playback function OFF.
28
TASCAM GB-10
, and
TEMPO BEAT
When the playback area is set to playlist, press this button
briefly to show the currently selected loop number.
If the loop range has been set, the " " and " " icons will
appear under the playback position bar.
Use the VALUE (+/–) buttons to change the selected loop
number ( –
LOOP 1 LOOP 5
When the playback area is set to playlist, press and hold
this button to show the loop screen.
Press the button designate the IN point, and press the
Â
¯ button to designate the OUT point. You can press the
 / ¯ button again to change the IN/OUT point. Use
the and / buttons to find the location in the
Á Ô 
track where you want to set each point.
).