Tascam GB-10 Owner's Manual page 25

button (PLAY)
Á
7
When the Home Screen is open, press when stopped to
start playback.
Press during playback to return to a specific time and
restart playback (flashback function). (See "Jump back a set
amount and continue playback (flashback)" on page 67)
When the screen is open, press to start and
METRONOME
stop the metronome.
Use during operation of a setting screen to confirm the
selection of an item and to respond "YES" to confirmation
pop-up messages.
Press this button while pressing and holding the RECORD
[ º ] button to start overdubbing. (See "Recording the input
sound with the playback sound (overdubbing)" on page
47.)
8 RECORD [ ] button/indicator
º
Press briefly when stopped to start recording. When
recording, the indicator lights. When the auto record
function is ON, press briefly to start recording standby.
When in recording standby, the indicator blinks.
Press and hold when stopped to enable prerecording (2
seconds maximum) and start recording standby. When
in recording standby, the indicator blinks. Press during
2–Names and Functions of Parts
recording standby to start recording. When recording, the
indicator lights.
Press the button while pressing and holding this button
Á
to start overdubbing. (See "Recording the input sound with
the playback sound (overdubbing)" on page 47.)
On the screen, use to execute the division of a file.
DIVIDE
9 VALUE (+/–) buttons
Use these to change setting values. Press + to increase the
value or – to decrease the value.
Press + and - buttons at the same time to set it to the
default value.
0 OUTPUT (+/–) buttons
Use these to adjust the volume level of the output from the
/LINE OUT jack. When using these buttons, the volume
level is shown in a pop-up at the bottom of the display.
Press + to increase the volume or – to decrease the volume.
q HOME button
Press to return to the Home Screen from one of the setting
screens.
25
TASCAM GB-10