Tascam GT-R1 Addendum

List of new functions

The following functions were added with firmware version
2.00.

1. Digital meter display on the Home Screen

A numerical display has been added to the meters.

2. Special recording functions

Track incrementing

Pre recording (PRE REC)
Record delay (DELAY)
File division (DIVIDE)
3. New BROWSE screen functions
New File Operation (INFO)
New Folder Operation (ALLDEL)
Additional Home Screen function
Digital display for meters
The maximum level that occurs during a fixed interval is
shown numerically on the Home Screen and Recording
Screen (*).
[Home Screen]
[Recording Screen]
Special functions during recording
Track incrementing
Incrementing the track number manually
During recording, you can create a new file that has
a number at the end of its file name that is one higher
(incremented) and continue recording.
1 Press the key during recording to create a new
≤
file with the number at the end of the file name
incremented (increased) and continue recording in
this file from its beginning (00H00M00S).
You can increment even when paused.
CAUTION
• You cannot increment if the total number of files
would exceed 999.
• You cannot increment when the current file is only
two seconds or shorter.
D01072710A
GT-R1
Addendum
• When incrementing, if a file already exists with the
incremented file name, the number will be increased
again to create a new unique file name.
• You cannot increment during overdub recording.

Automatic track incrementing according to file size

When a file reaches a designated size during recording, you
can set the unit to automatically create a new file with an
incremented file name and continue recording.
1 Press the key to open the menu list screen.
MENU
Select
REC SETTING
open the
REC SETTING
2 Use the item to select the file size for
SIZE
automatic incrementing.
Options: 64M, 128M, 256M, 512M, 1G, 2GB
(default setting)
CAUTION
You cannot increment if the total number of files would
exceed 999.
NOTE
The recording time differs for the same file size depend-
ing on the file format. Moreover, 23:59:59 appears if the
recording time is 24 hours or more.

Pre-recording

When the unit is in recording standby, the unit can record
the two seconds before the start of recording and include it
in the recording.
Use the following procedures to set pre-recording.
1. Press the key to open the menu list screen.
MENU
Select
REC SETTING
open the
REC SETTING
2 Use the item to turn pre-recording ON
PRE REC
or OFF.
Options: ON, OFF (default setting)
CAUTION
• If the unit has been in recording standby for less
than two seconds, only the amount of time that the
unit has been in standby will be included
• Pre-recording is not possible if the remaining space
on the SD card is three seconds or less.
• When PRE REC is set to ON, overdub recording
cannot be used.
NOTE
Set DELAY to OFF when you set PRE REC to ON.
and press the Á/π key to
screen.
and press the Á/π key to
screen.
1
TASCAM GT-R1