Adjusting The Balance Between Playback And Input Signals; Disabling The Guitar Input - Tascam GB-10 Owner's Manual

Adjusting the balance between
playback and input signals
You can adjust the balance between the input sound of a
connected guitar or bass being played and the playback
sound of a file.
Use the INPUT volume to adjust the level of the input signal,
and press the BALANCE button to open the "
and adjust the level of the playback signal.
Adjust the volume of the playback sound using the VALUE
(+/–) buttons. The range is from "
(maximum), and the default value is "
NOTE
setting only affects the volume when G.IN is
The
BALANCE
). When G.IN is OFF(
ON (
value has no effect on the volume.
" item
BALANCE
" (minimum) to " "
0 20
".
20
), changing the
BALANCE

Disabling the guitar input

When you want to listen to just the playback signal, you can
disable the guitar input to prevent any unwanted noise.
If you want to disable the guitar input (GUITAR IN jack), press
the ¶ / button when the Home Screen is open so that the
G.IN icon appears as dark letters on a light background (
).
Press the ¶ / button again to enable the guitar input. The
G.IN icon appears as light letters on a dark background (
) when input is enabled.
NOTE
If you turn the guitar input off (
level meter area.
When the guitar input is off, the BALANCE setting is canceled
and the playback level returns to its original setting.
7–Playback
), " " appears in the
[OFF]
59
TASCAM GB-10