Repeat And Single Track Playback - Tascam GB-10 Owner's Manual

10-Loop Playback/Repeat Playback/Single Track Playback
When you want to restart loop playback, press the LOOP
button briefly to start loop playback of the last used loop.
In the LOOP setting area shown at the bottom of the display,
the word " " is followed by a number, which shows the
LOOP
current loop. Use the VALUE (+/–) buttons to change the loop
number. During loop playback, you can change this number
to start loop playback of a different loop if the loop assigned
to that number has IN (starting) and OUT (ending) points set.

Repeat and single track playback

You can repeatedly play back the current file (one file) or
multiple files within the designated playback area. You can
also play just one file.
1. Press the MENU button to open the MENU screen.
2. Use the /BROWSE and
§
" and press the
Á
MODE
3. Use the /BROWSE and
§
"REPEAT" item, and use the VALUE (+/–) buttons to set
/ buttons to select "
¶
button or button.
¯
buttons to select the
/
¶
the playback mode.
OFF(default)
Play all tracks in the playback area in sequence. (This is the
ordinary playback mode.)
SINGLE
Play one file without repeating.
The icon appears on the Home Screen.
1 REPEAT
Play the currently playing file repeatedly.
The icon appears on the Home Screen.
ALL REPEAT
Play all the files in the selected playback area repeatedly.
The icon appears on the Home Screen.
NOTE
PLAY
If you start loop playback, the REPEAT item automatically
switches to OFF if it is in a different mode.
71
TASCAM GB-10