REAR FOG LAMP*, BACK-UP LAMP, LICENSE PLATE LAMP
License Plate Lamp
1. Disconnect the negative cable on
the battery.
2. Remove the lamp housing by push-
ing it to the right.
3. Turn the bulb to remove it.
4. Install the new bulb in the reverse
order of removal.
Rear Fog Lamp* / Back-up Lamp
1. Disconnect the negative cable
on the battery.
2. Open the tailgate.
3. Pry off the cover with a flat blade
screwdriver.
4. Turn the lamp connector to remove
it.
5. Remove the bulb while pushing
and turning it.
6. Install the new bulb in the reverse
order of removal.
14-7
LAMPS