SSANGYONG STAVIC 2006 Owner's Manual page 209

9. Combine the wheel nut wrench and the jack connection
as shown in figure and hook it into the connecting ring.
Jack up the vehicle by rotating combined wrench clock-
wise until the tyre is off ground about 3 cm.
10. Remove the wheel nuts by hands while the vehicle is
stationary. For rear tyre, release the parking brake
carefully.
11. Remove the tyre and put it under the vehicle body.
12. Fit the spare tyre and temporarily tighten the wheel nuts
by hands.
13. Lower the vehicle by rotating the combined wrench
counter-clockwise until the tyre touches the ground.
14. Remove the jack and tighten the wheel nuts securely by
2 or 3 steps in the sequence as shown in the figure.
IN CASE OF EMERGENCY
12-9