Table of Contents
Advertisement
Expansion Slots
This mainboard has one AGP, one CNR and five 32-bit PCI slots.
PC4
PCI2
CNR1
PC5
PCI3
Follow the steps below to install an AGP/CNR/PCI expansion card.
1. Locate the AGP, CNR or PCI slots on the mainboard.
2. Remove the blanking plate of the slot from the system chassis.
3. Install the edge connector of the expansion card into the slot.
Ensure the edge connector is correctly seated in the slot.
4. Secure the metal bracket of the card to the system chassis with
a screw.
8x AGP Slot
You can install a graphics adapter tha t supports the 8x AGP
specification and has a 8x AGP edge connector in the AGP slot.
CNR Slot
You can install the CNR (Communications and Networking Riser)
cards in this slot, including LAN, Modem, and Audio functions.
PCI Slots
You can install the 32-bit PCI interface expansion cards in the slots.
Pin Signal
1
CD IN L
2
GND
3
GND
4
CD IN R
AGP1
PCI1
17
Advertisement
Table of Contents
