Hot-Swap SAS/SATA Backplane
The backplane serves as an interface between the mid-plane board and the system drives. The
following diagrams show the location for each connector found on the backplane.
Figure 12. Hot-Swap SAS/SATA Backplane Components (Front View)
Figure 13. Hot-Swap SAS/SATA Backplane Components (Rear View)
A. Flex Bay Power
B. Flex Bay Data
MAXDATA Server PLATINUM 00 IR M7
A
B
A.
Optical Drive Connector
B.
USB Floppy Connector
A
B
C
D
C.
Control Panel Connector
D.
SAS/SATA Connectors
C
D
C. Backplane Power
D. Data Connectors (one for the flex
bay and one for the mid-plane)
1